healthOverSize
New member
For anyone new to using the Pfizer GENOTROPIN GOQUICK 12-36 IU pen, it can be a bit tricky at first. Here's a more detailed guide to help you avoid some common mistakes and make the process smoother.
Step-by-Step Success:
1) Read the Instructions Thoroughly
Start by carefully reading the official instructions on pages 26 to 33. It’s important to understand how the pen works before you begin:
[Instructions PDF](http://www.pfizer.ca/en/our_products/products/patient_infosheet/334)
2) Watch Instructional Videos
Visual aids can help clarify the process. Check out these videos for a better understanding of how to use the pen:
- [Video 1](http://vimeo.com/89640470)
- [Video 2](http://www.youtube.com/watch?v=Yy6IgkosdRI)
3) Revisit the Instructions
Once you’ve watched the videos, go back and re-read pages 26 to 33 to ensure you’re clear on the details. This step is key to avoiding errors.
Common Rookie Mistakes and How to Avoid Them:
Mistake #1: Mixing the Chamber Before Attaching the Needle
This is a big one. If you mix the cartridge before attaching the needle, you’ll compress the air in the chamber, which can lead to pressure build-up and potential leakage. Always attach the needle first.
Mistake #2: Pen Positioned Incorrectly During Injection
If you’re injecting with the pen lying on its side, the pressure can cause the liquid to spill out. Always make sure the pen is upright during the injection.
Mistake #3: Turning the Gray Dial Before the Black Dial
Once you start turning the gray dial (used to adjust the dose), you can’t go back to adjust the black dial (which sets the dose of the pen). So make sure you're done with the black dial before you move on to the gray dial.
Mistake #4: Not Waiting Long Enough After Injection
Don’t rush the process. After injecting, make sure to leave the needle in for at least 5-10 seconds to allow the full dose to be administered. If you pull out too quickly, you might lose some of the medication.
Frequently Asked Questions:
- Can the cartridge be removed?
No, the cartridge is not designed to be removed once it’s inserted.
- What type of needles can be used with the pen?
Only BD Ultra-Fine Pen Needles are compatible with the GENOTROPIN GOQUICK pen.
- How many mg is one IU?
12 mg / 36 IU = 0.33 mg per IU.
Final Thoughts:
Once you get the hang of it, using the GENOTROPIN GOQUICK pen is much quicker and easier than preparing a syringe. However, taking the time to understand the device and avoid common mistakes will help you use it more effectively.
Have you used the GENOTROPIN GOQUICK pen?
Step-by-Step Success:
1) Read the Instructions Thoroughly
Start by carefully reading the official instructions on pages 26 to 33. It’s important to understand how the pen works before you begin:
[Instructions PDF](http://www.pfizer.ca/en/our_products/products/patient_infosheet/334)
2) Watch Instructional Videos
Visual aids can help clarify the process. Check out these videos for a better understanding of how to use the pen:
- [Video 1](http://vimeo.com/89640470)
- [Video 2](http://www.youtube.com/watch?v=Yy6IgkosdRI)
3) Revisit the Instructions
Once you’ve watched the videos, go back and re-read pages 26 to 33 to ensure you’re clear on the details. This step is key to avoiding errors.
Common Rookie Mistakes and How to Avoid Them:
Mistake #1: Mixing the Chamber Before Attaching the Needle
This is a big one. If you mix the cartridge before attaching the needle, you’ll compress the air in the chamber, which can lead to pressure build-up and potential leakage. Always attach the needle first.
Mistake #2: Pen Positioned Incorrectly During Injection
If you’re injecting with the pen lying on its side, the pressure can cause the liquid to spill out. Always make sure the pen is upright during the injection.
Mistake #3: Turning the Gray Dial Before the Black Dial
Once you start turning the gray dial (used to adjust the dose), you can’t go back to adjust the black dial (which sets the dose of the pen). So make sure you're done with the black dial before you move on to the gray dial.
Mistake #4: Not Waiting Long Enough After Injection
Don’t rush the process. After injecting, make sure to leave the needle in for at least 5-10 seconds to allow the full dose to be administered. If you pull out too quickly, you might lose some of the medication.
Frequently Asked Questions:
- Can the cartridge be removed?
No, the cartridge is not designed to be removed once it’s inserted.
- What type of needles can be used with the pen?
Only BD Ultra-Fine Pen Needles are compatible with the GENOTROPIN GOQUICK pen.
- How many mg is one IU?
12 mg / 36 IU = 0.33 mg per IU.
Final Thoughts:
Once you get the hang of it, using the GENOTROPIN GOQUICK pen is much quicker and easier than preparing a syringe. However, taking the time to understand the device and avoid common mistakes will help you use it more effectively.
Have you used the GENOTROPIN GOQUICK pen?
